Ατμολέβητες της Ιταλικής ICI Caldaie, του μεγαλύτερου Ευρωπαίου κατασκευαστή

Κατασκευή ΟΕΜ ατμολεβήτων για περισσότερα από 15 Ευρωπαϊκά εργοστάσια

ατμολέβητας

Χαρακτηριστικά

Ατμολεβήτων ICI Caldaie

  • Περιλαμβάνουν όλα τα απαραίτητα εξαρτήματα που απαιτούνται για άμεση εκκίνηση, ρύθμιση και αυτόματη λειτουργία

  • Εξαιρετική απόδοση και πολύ χαμηλές εκπομπές NOx

  • Κυρίως σώμα του λέβητα από χάλυβα ποιότητας P265GH UNI EN 10028/2 και P275NH UNI EN 10028/3 το οποίο συγκολλείται και ελέγχεται με μεθόδους εγκεκριμένες για την σήμανση CE και σύμφωνες με την οδηγία PED 97 /23/EC

  • Οριζόντιο θάλαμο καύσης που είναι δυνατόν να κατασκευαστεί με κυμματοειδή επιφάνεια για ακόμη καλύτερη μετάδοση της θερμότητας ενώ απορροφάει τις συσταλοδιαστολές του μετάλλου, προστατεύοντας με αυτό τον τρόπο τις συγκολήσεις και εξασφαλίζοντας προστασία από εντάσεις ακόμη και στα σημεία που σε άλλους λέβητες απλών γεωμετριών δέχονται τεράστιες πιέσεις
  • Επίπεδοι καθρέπτες τούμπων με ανοίγματα ανοιγμένα με τεχνολογία κοπής πλάσματος και τον μπροστινό καθρέπτη λυγισμένο ως προς τον θάλαμο καύσης ώστε οι κολλήσεις να βρίσκονται στο ίδιο επίπεδο και όχι υπο γωνία μεταξύ τους. Αυτή η ειδική τεχνική αποτελεί πρωτοπορία στον τομέα της κατασκευής ατμολεβήτων αφού με αυτό τον τρόπο το σημείο του λέβητα που δέχεται τις μεγαλύτερες εντάσεις και στρες έχει εξαλειφθεί
  • Οι συγκολλήσεις ελέγχονται διεξοδικά σε ειδικό θάλαμο με διαδικασία ακτινογράφησης που βρίσκεται εντός του εργοστασίου
  • Εργοστάσιο συνολικής επιφάνειας 30.000 m2

SIXEN 350 - 5.000 kgr/h 90%

SIXEN (version recommended for export)

HIGH PRESSURE AND FLAME INVERSION STEAM BOILERS

Design pressure:   12 o 15 bar 
Steam Production:   350 ÷ 5000 kg/h
Efficiency:   90%

Steam boiler three pass reverse flame wet back firetube boiler complying with the PED 97/23/EC Directive, suitable for liquid and gaseous fuels, steam production range from 350 up to 5000 kg/h, available with design pressure of 12 or 15 bar, complete with regulation and safety accessories for automatic operation.

Features:

- regulating pressure gage
- 2 vertical multistage centrifugal pumps suitable for 120°C water
- 3 shut-off valves, powered at flow start
- 2 pump suction filter
- 3 non return valves

GSX 350 - 5.000 kgr/h 91%

GSX (350 ÷ 5000 kg/h) - Low Nox

HIGH PRESSURE 3 PASS STEAM GENERATOR - LOW NOX EMISSIONS

Design pressure:   12 o 15 bar 
Steam Production:   350 ÷ 5000 kg/h
Efficiency:   91%

LowNOx web

Compact three pass steam boiler. Monobloc unit with excellent performance and advanced technical solutions, designed and constructed to give maximum guarantee of reliability, durability, and management. The boiler is horizontal, three pass, passing flame, wetback packaged type.
Best with low NOx gas burners.

BENEFITS

  • High performances and low NOx emissions starting from minimum capacity; starting from the low power available (350 kg/h), the GSX steam boiler ensures optimal environmental efficiency.
  • Large heat exchange surfaces; very high energy efficiency thanks to the large heat exchange surfaces that ensure maximum efficiency values in all operating conditions.
  • Low thermal load; low NOx emissions in accordance with the most stringent national and international
    regulations, through the use of a very low volumetric thermal load of the combustion chamber featuring a specially designed structure for the best combination with burners with low emissions of pollutants.
  • High water content; maximum operating flexibility with varying loads thanks to the high water content.
  • High efficiency; maximum reliability and durability guaranteed by the specific design with low surface thermal loads.
  • Constant supply of steam quantity; the boiler meets every need, even at peak demand time, thanks to the generously sized steam chamber.
  • Efficiency at all costsintegrated solutions for performance improvement thanks to flue gas recovery systems specially designed and integrated within the generator structure.

Export Features:

  • regulating pressure gage
  • 2 vertical multistage centrifugal pumps suitable for 120°C water
  • 3 shut-off valves, powered at flow start
  • 2 pump suction filter
  • 3 non return valves

GX 1.700 -25.000 kgr/h 90%

GX (version recommended for export) (1700 ÷ 25000 kg/h)

HIGH PRESSURE 3 PASS STEAM GENERATOR

 

Design pressure:   12 o 15 bar 
Steam Production:   1700 ÷ 25000 kg/h
Efficiency:   90%

High pressure steam boiler genuine three pass wet back firetube. Suitable for liquid and gaseous fuels. Supplied accessories needed for automatic operation. Supplied accessories needed for automatic operation with mechanical and hydraulic assembly for all equipment and certifications ,also in compliance with the PED 97 /23/EC Directive.

BENEFITS

  • Fully flanged tube plates
    The hot-flanged tube plates of the GX steam boiler ensure the absorption of thermal expansion according to the different workloads
  • High steam fraction at each load
    The large mirror of evaporating fluid and the particular internal separator prevent the entrainment of water droplets to the steam outlet; the steam produced is therefore always of high quality as it features a very high steam fraction
  • Great reliability in continuous operating mode
    The construction features of the GX steam boiler make it particularly suitable even for intense and heavy duty work loads and periods
  • To can be configured as required
    A wide range of optional accessories is available to customise the product according to any specific intended use requirement
  • High management technology
    The boiler management can be implemented with a programmable logic for complete compatibility with any data acquisition system, allowing you to display and set the operating parameters of the machine
  • Front hinged doors with double joint
    The front doors are double and can be fully opened without needing to remove the burner. This reduces the required manoeuvre space and makes the cleaning and maintenance very simple


 Export Features:

  • 2 vertical multistage centrifugal pumps suitable for 120°C water
  • 3 shut-off valves, powered at flow start
  • 2 pump suction filters
  • 3 no return valves

BNX 100 - 3.000 kgr/h >91%

BNX (version recommended for export) (100 ÷ 3000 kg/h)

LOW PRESSURE, FLAME INVERSION STEAM GENERATOR

 

Design pressure:   0,98 bar or 0,5 bar (called BBX) or 0,7 bar *
Steam Production:  100 ÷ 3000 kg/h
Efficiency:   > 91%

*0,7 bar = design pressure for countries such as Russia, Belarus, Kazakhstan, Georgia, Ukraine.

Monobloc low-pressure reverse flame steam boiler with wet back, suitable for liquid or gaseous fuels.

It is a brand-new boiler, designed to guarantee high-quality steam also at low operating pressure and with high drawing peaks. It has a latest generation user interface provided with warning and alarm systems and with optimised dimensions for the installation in small-size heating plant rooms and facilitating the ordinary maintenance and inspection operations.

Features :
- 2 spring safety valves
- 2 level indicators with direct reflection
- 1 regulating pressure gauge
- 2 centrifugal pumps suitable for 90°C water
- 3 delivery shut-off valves
- 2 pump suction filters
- 3 non return valves

FX 50 - 50 kgr/h 91%

FX (50 ÷ 150 kg/h)

INSTANTANEOUS FIRE TUBE STEAM GENERATOR

Design pressure:   5 bar
Steam output:   50 kg/h ÷ 150 kg/h
Efficiency:   91%

Monobloc, instantaneous, flame inversion, wet-base, fire tube steam generator in compliance with Directive PED 2014/68/EU, suitabled for liquid or gaseous fuels, for steam production from 50 to 150 kg/h, with project pressure of 5 bars, complete with regulation and safety accessories for automatic operation. The volume of water contained inside (PxV<300) means that the installation site does not need a licensed conductor. The generator is certified in all components and does not need any intervention by ICI Caldaie qualified technicians for the first start-up.

FX Dual 100 - 300 kgr/h 91%

FX DUAL (100 ÷ 300 kg/h)

INSTANTANEOUS FIRE TUBE STEAM GENERATOR

Design pressure:   5 bar
Steam output:   100 kg/h ÷ 300 kg/h
Efficiency:   91%

Monobloc, instantaneous, flame inversion, wet-base, fire tube steam generator in compliance with Directive PED 2014/68/EU , suitabled for liquid or gaseous fuels, for steam production from 100 to 300 kg/h, with project pressure of 5 bars, complete with regulation and safety accessories for automatic operation. The volume of water contained inside (PxV<300) means that the installation site does not need a licensed conductor. The generator is certified in all components and does not need any intervention by ICI Caldaie qualified technicians for the first start-up.


Εκτύπωση   Ηλεκτρονικό ταχυδρομείο